Electric Box

Why won't it start anymore? :(

This game definitely belongs in the superhero genre

Line 14: It would work for me if the steam were routed to that detector via the middle one. Please suggest a solution.

This can't be possible. I've already tried the walkthroughs for Level 14, but nothing's working. Please help.

Lv.11. Rotate the small fan; position the large fan so that it receives energy from the small one; position the light bulb so that the second rod receives energy from it; place a cube on the same plane as the light bulb; place a ball pointing toward the fan (any fan); and place another cube on the same plane as the light bulb.

Lv. 3. Place the watering can at the end where the switch is; place a radiator—or whatever it is—on the two points at the top, with a (small) fan next to it; place a (large) fan at the top right; place a watering can at the beginning; and place a radiator at the top where the target is. Level 4. Place the watering can on the right; place one magnet on the radiator’s plane and the other on the watering can’s plane, but on the power source connected to the radiator. More walkthroughs tomorrow. :-)

Level 14 Walkthrough: 1. Place the propeller on the shelf above the power source, facing right. 2. Place two propellers on the last shelf above the power source, facing right. 3. The white fan to the right of the two tallest fans. 4. The ball at the very top, above the middle fans. 5. The magnet 3 squares to the right of the middle fan, facing left. 6. The fan below the magnet, facing right. 7. The robot below the fan, facing left. 8. And the fan two shelves to the left of the water. Done... that was a challenge.

best LOL

Help Level 11

Walkthrough for Level 15: Place a laser above the switch, pointing to the left; right next to it, place a laser detector; place another laser detector; above that, place a ball dropper; next to the laser detector, place a mirror that deflects the beam upward;and as high as possible above that, place a mirror that bends the beam to the left, which will direct the laser to the next laser detector; place another ball dropper below this detector and activate the power source. I hope these instructions work for you.